Troubleshooting and fixing a leaking toilet in your home!

By  | 

A leaking toilet can be quite a dilemma and pain in your household life. It can easily lead to a bad start to the day when you enter your bathroom to brush your teeth and notice a pool of water at the base of your toilet. It’s a very annoying thing and frustrates you by being at the back of your mind all day long. However, as irritating as it is, a leaking toilet is a very common plumbing problem. And the great thing is, you can definitely try your hand at fixing the toilet. Knowing how a toilet functions will help you to troubleshoot and repair it in case of leakage.

If you notice a puddle of water around the base of your toilet, you are most likely having a leaking toilet. You need to immediately refrain from using the toilet, as the water that has leaked onto the floor is from your toilet bowl. This water, if left sitting on the floor, can cause damage to it, as well as cause mould on it. This gives rise to a highly unhygienic environment in the bathroom, and should be cleaned up thoroughly using a disinfectant, right after the leak is fixed. You may be able to repair the leak yourself or call over professionals to repair the leaking toilet. A. Able Plumbing, Gas & Hot Water are the leakage repair specialists in Perth and will come over to help in no time. They have a team of skilled, experienced plumbers who will repair your leaking toilet in the blink of an eye.

Here’s how you can fix a leaking toilet at home

So, you have a leaking toilet at your home, what do you do next? Call over emergency plumbing services in Perth? Or try your own hand at repairing it? If you notice water pooling around the base of your toilet on a regular basis, you are correct to think that there’s a water leak. Now all you need to do is follow the steps, detect the source of the leak, and get it fixed. Here are the three major steps that you need to follow:

Step 1: This step is all about checking to see if the water leakage is actually just condensation. It could be the condensation forming on the toilet bowl or the tank, and could be dripping onto the floor. You need to check and feel around the sides of the toilet to be sure it’s not condensation. If it is condensation, you could fix it by lowering the room humidity, insulating the tank, as well as replacing the flapper.

Step 2: The next step is to identify the source of the leakage. You need to be sure if the leak is coming from inside the tank or someplace else. If you are always hearing the sound of running water or a soft hissing, or if the toilet never properly shuts off, there is a chance that the leak is inside the toilet tank. You could then add a few drops of food colouring, and if it shows up in the bowl, you have a confirmed leak, and if it shows at the toilet base, you know your culprit.

Step 3: The final step is all about checking and fixing the problem. The pool of water can be due to a variety of reasons. It may be due to cracks in the toilet bowl which will need sealing. There could be a leak between the ball cock at the base of the tank and the water supply line, which will require replacement or tightening of the parts. There could be a failure in the wax gasket seal which connects the toilet to the drain pipe. You could also check on the water shutoff valve.

So, the reasons could be many and the result the same always, a leaking toilet. After you follow all the above steps and successfully fix the leak, you need to make sure to clean up afterwards using disinfectants and bleach. Also, wear gloves during the cleaning process and wash your hands thoroughly. Then you can go back to using your toilet again.